Dustless Dustie Istruzioni per l'installazione

Sfoglia online o scarica il pdf Istruzioni per l'installazione per Smerigliatrice Dustless Dustie. Dustless Dustie 2. For right angle grinders

Stampa la pagina

Kit # 16500 Includes:

1 - 16006 HEP Wet/Dry Vacuum

1 - 13141 Micro Pre Filters (2 pkg)

1 - 13242 HEP Floor Tool

1 - 60001 ChipBuddie

1 - D1836 5" Dustie

1 - D5160 6' dapter Hose

HEP Vacuum - Complete

owners manual enclosed

with vacuum.

HEP Floor Tool -

The HEP Floor Tool

features a beater bar

as specified by EP

to meet renovation

contractor certification

requirements. Fit

easily into HEP

Vacuum attachments.

For a complete version of all owner's manuals, please visits www.dustlesstools.com <http://www.dustlesstools.com> or call 800 568-3949.

16006 HEP Vacuum

ssembly - To install the legs and

accessory tray, undo the clips hold-

ing the intermediate cover in place

and set the cover and lid assembly

aside. Turn tank upside down. Front

legs are on either side of the drain

port opening. These front legs do

not have the small hooks on either

side. The back legs do have the

hooks. These hooks are for the

hose to rest on when in storage.

lign legs with openings provided

on bottom of the canister and slide

into place. The holes will only align

in proper position for front and back

legs. Insert black support screw

into hole and tighten screw with a

Phillips screwdriver.

Turn cleaner tank right side up.

dapter Hose -

ttaches easily to

HEP Vacuum hose.

ChipBuddie - Hook it to a hose

with the 6' hose adaptor and

scrape. Change blade by using a

Philips screwdriver. Works on

both sides of the blade for

collecting debris in both

directions. Use for scraping

paint or popcorn ceilings.

DUSTLESS

Compliance Kit

60001 ChipBuddie

13141 Micro Pre Filters

ttach ccessory Tray

lign the three slots on the edge of

the accessory tray with the three

guides on the rear side of the tank

and press the accessory tray toward

the tank as you push the tray down.

The two locking tabs will slide

under the rim of the tank and catch.

By pushing the tray down and

toward the tank it will lock into

place.

Place intermediate cover and lid

assembly right side up and set

on top of the tank. ttach the

yellow clips from the tank onto

the intermediate cover.

The Lid ssembly with the vacuum

controls, motor, and filters are all

preassembled at the factory for your

Micro Pre-filter -

To install the Micro

Pre-filter, flip back

the lid tabs and

remove the lid.

Put the Micro Pre-

filter inside the

canister and slide

the opening of the

cardboard mounting collar over the input port on the inside

of the canister. Press firmly around all edges to ensure a

snug fit and air tight seal. Spread the Micro Pre-filter out,

making sure no part of it gets trapped under the edge of the

lid. Reinstall the lid and flip the locking tabs back

to the down position.

EP Lead-Safe

13242 HEP

Floor Tool

convenience. Maintenance and

replacement of filters is described

later in this manual.

ttach hose, wands and

cleaning accessories

Hose and accessories are stored

on the unit. The hose will loop

through the two outside holes of the

accessory tray and rest on the hooks

of the back legs as shown below.

For convenience, additional

accessories can be stored on

tray when not in use.

To Use ccessories

Push hose into tank port; twist hose to

tighten or loosen connection. The

wands and cleaning accessories

attach to hose in the same manner.

D1836 5" Dustie

D5160 6'

dapter Hose

Kit Model 16500