ADE KE 1162 Manuale di istruzioni per l'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Bilance ADE KE 1162. ADE KE 1162 14. Modell marie

Stampa la pagina

Thank you for purchasing this high-quality product made by ADE. You have acquired a

set of scales that meet the highest technical standards and are of proven quality.

Please read these operating instructions carefully before using the product for the first

time and keep them in a safe place where you can find them whenever you need the

information contained in the instructions.

Putting into service

Insert batteries:

Open the lid of the battery compartment on the bottom of the scales and insert the three

supplied 1.5 V AAA batteries. Please observe the correct polarity of the batteries (+/-).

To replace the batteries open the lid of the battery compartment. Move the battery at the

recess downwards. In this way, the batteries will be easy to take out. Make sure that you

do not bend the contact. Insert the new batteries and close the lid of the battery

compartment.

Safety information:

Ensure that no objects fall onto the scales; otherwise, the scales

may be damaged.

Only use a damp cloth to clean the scales. Never use solvents

or abrasive cleaners. Do not put the scales under water. You

must clean all the plastic parts of the scales immediately after

they come into contact with grease, spices, vinegar or any other

strongly spiced or coloured foods. Avoid any contact with citric

acid.

2. Handling

Switch-on the sca le:

Place the scales on a firm, level base. To switch on, press the Tare-button right beside

the display. The backlighting comes on and the display initially shows at first the

characters "88888". After the scales have stabilised, they display "0 g", "0.000 kg",

"0.000 lb" or "0.00 oz", depending on the setting. The scales are now ready to weigh.

Units of weight:

Pressing the Unit-button left beside the display allows you to change country-specific

units of weight (g = grams / kg = kilograms / lb = pound / oz = ounces). Please ensure

that the scales are set to the appropriate units of weight for you.

Tare-func tion:

Pressing the Tare-button allows you to set the scales to "0 g" (indication: tare-icon -o-).

Place a bowl, for example, on the platform of the scales, press the Tare-button and in this

way set the scales back to "0 g". You can repeat this procedure as often as you like until

the total capacity of the scales (5 kg) has been reached. After you remove the item(s) to

be weighed, the total weight is displayed as a minus value (indication: minus-icon –).

Automatic- / manua l switch-off the scale:

If the indicated weight does not change within approx. two minutes, the scales will

automatically switch-off. To save the batteries you can also manually switch-off the scales

by pressing the Tare-button for approximately two seconds after you have finished using

them.

3. Error Messages

"LO"

Indication that the battery is flat – Please replace the batteries with

three 1.5 V type AAA.

"EEEE"

Overload display – The 5 kg maximum capacity of the scales has been

exceeded. Immediately remove the load from the scales; otherwise, the

load cell could be damaged.

4. Technical Data

Capacity x graduation:

max. 5 kg x 1 g

Dimensions:

170 mm x 230 mm x 20 mm

Batteries:

3 x 1.5V AAA (included)

Subject to technical changes due to further-development of the product.

5. Guarantee

ADE guarantees to rectify any defects due to material or manufacturing defects by means

of repair or replacement free of charge for a period of three years. At the time of purchase,

please get the retailer to fill in and stamp the guarantee card. In the case of guarantee

claims, please return the scales to your retailer including the guarantee card and stating

the reasons for the claim.

CE conformity

This device is interference-supp ressed in accordan ce with

the app licable EU direc tive 2004/108/EC

Note: Extreme electromagnetic influences, e.g. when operating radio communication

equipment is being operated next to the scales, can affect the displayed value. When the

interference is over, you can use the product for its intended purpose again; it may be

necessary to switch it on again.