Datamax 220236-000 Manuale rapido - Pagina 2

Sfoglia online o scarica il pdf Manuale rapido per Caricabatterie Datamax 220236-000. Datamax 220236-000 2. Oc family of printers depot charger

Stampa la pagina

Attaching the Power Supply

OC Desktop Cradle Charger

Use the following procedure to attach the power

supply to the desktop cradle charger.

1. Insert the power supply into the desktop cradle

charger.

2. Guide the power supply cord through the slots

to form a strain relief, as shown above.

OC 4-Up / 5-Up Charging Brackets

Use the following procedure to attach the power

supply to the charging brackets.

1. Insert the power supply cord into the power

supply socket. Make sure the three prongs are

inserted correctly.

2. Plug the power supply into the correct outlet.

Inserting the Printer(s)

To insert a printer to a desktop cradle charger or a

charging bracket, place the printer in the charger

so the LEDs are facing up.

Note: Make sure you regularly clean the

charging contact points on your printer's case

to ensure your printer's batteries are properly

charged, and to avoid damage to the printer or

the charger. To clean the charging contact

points, use alcohol and a clean rag.

Using the Battery Charger

Note: The battery charger is designed to

charge Lithium Ion (Li-ion) batteries only.

1. Position the battery above the charger so that

the contacts on the bottom of the battery align

with the contacts on the charger.

2. Place the battery in the charger. The charging

cycle begins. The battery LED turns green

when the charge is complete.

Agency Approvals

FCC Notice

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, it may cause harmful interference to radio

communications. However there is no guarantee that interference

will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment to an outlet on a circuit different from that

to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Applicable Directive

89/336/EEC, 73/23/EEC

Applicable Standards

EN55022 (1998)

EN55024 (1998)

EN60950 (1992)

Warranty

The Company warrants that Datamax-O'Neil products are free from

defects in manufacturing materials and workmanship for one (1)

year from date of original purchase to Buyer/Distributor (OEMs 90

days from the date of purchase). Batteries, cables, power supplies,

and other accessories will be warranted for ninety (90) days.

Datamax-O'Neil makes no other warranties, expressed or implied,

including implied warranties of merchantability and fitness of

purpose.

If you try to repair, disassemble, or change the product in any way,

or use parts not provided by Datamax-O'Neil without prior, written

authorization, all warranties are void.

For complete warranty and service information, see the Warranty

Card included in your printer's original packaging.

No Liability for Negligent Use

In no event shall Datamax-O'Neil be held liable for any damages

whatsoever (including, without limitations, damages for loss of

profits, business interruption, loss of information, or other

pecuniary loss) arising out of negligence in use and care of the

product.

110197-002

OC Family of Printers

Depot Charger