Datamax-ONeil microFlash 8i 270 Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Stampante Datamax-ONeil microFlash 8i 270. Datamax-ONeil microFlash 8i 270 20.

Using the Ribbon

In the event of a jam to or under the ribbon, replace the

ribbon immediately. If the jam continues, do not remove

the smear guards.

The printer ships without a ribbon installed. To install a

ribbon, perform the following:

1. Open the printer's cover.

2. Depress the locking lever (green knob) to open the

print mechanism.

3. Remove the ribbon from its packaging.

4. Hold the ribbon by the flat handle.

5. Install the ribbon on the printhead (Figure 5).

Figure 5

6. Turn the knob counter-clockwise several times to

fully seat the ribbon.

1. Grasp the flat handle.

2. Pull the ribbon out of the brackets.

MF8i 270 PRINTER USER'S GUIDE