Datapath activesqx Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per PCI Card Datapath activesqx. Datapath activesqx 15.

Software Overview

The ActiveSQX requires little configuration to be up and running, the your software should detect the card

and allow you to add IP camera windows to your display wall. The card opens a gateway to the network

enabling the user to add, configure and modify IP cameras using the Datapath SQX software.

The application displays the connected source in a window on your desktop; it has the following features:

•

Scales the data to fit in the window

•

Ability to set up sources accurately (settings automatically saved)

•

Command line interface

Alternatively use the SQXEasy SDK.

Note:

The supplied drivers and software require that you are using:

•

Windows® 7 64 bit / Server 2012

•

CD / DVD ROM Drive

The Datapath SQX software (driver and application) is installed by inserting the CD that was shipped with

your card into your DVD drive. The installation process should start automatically.

Should the DVD fail to autorun use Explorer to browse the CD, locate then double click on install.exe

file e.g. d:/install.exe and click on Install Software... and follow the installation wizard instructions as

prompted.

Regular software updates are available from our website:

Firmware Upgrades

The ActiveSQX cards allow firmware upgrades to be completed on site rather than returning the card to

Datapath. Whenever a firmware upgrade is performed, the JP8 Link MUST BE FITTED on the

ActiveSQX card.

To perform the upgrade, follow the step-by-step instructions provided by the upgrade application.

In the unlikely event that something goes wrong during the upgrade process (e.g. System power outage)

it is possible to revert to the factory settings by powering down the system, temporarily removing the JP8

link then powering up the system with the link removed.