Datapath VSN870 Manuale d'uso - Pagina 16

Sfoglia online o scarica il pdf Manuale d'uso per Controllore Datapath VSN870. Datapath VSN870 20. Video wall controller

The LED's indicate the following:

•

Flashes on for 1.5 seconds then off for 0.5 seconds.

This indicates that the full lane width has been established for that slot e.g. x4 card in a x4 slot

•

Flashes on for 0.5 seconds then off for 1.5 seconds.

This indicates that a reduced lane width has been established and the slot is not working to maximum

efficiency e.g. a x1 card inserted into a x4 slot.

•

No LED's flashing.

This indicates that lane width has not been established.

The LED's will not flash on slots where no cards are installed.

VSN870 Series Approved Accessories

The items below are UL Listed Accessories for VSN870 series machines. Use of these plug-in cards within

VSN870 and Vision800X chassis, to build custom systems, will maintain the UL listed status for the system.

The cards can be used in any combination, in any order, in any slots on the backplane(s) without losing the

approval.

ImageDP4

VisionRGB-E1S

VisionRGB-E2S

VisionSD8

VisionSD4+1

VisionSDI2

VisionDVI-DL

H-Link

S-Link

ExCable

Quad-screen graphics card

Single channel HD video capture card

Dual channel HD video capture card

Eight channel SD video capture card

Combination video capture card with 4 channels of SD and 1 channel of HD

Dual channel HD-SDI video capture card

Single channel Dual-Link video capture card

Host Link card for expansion racks

Slave Link card for expansion racks

Cable for expansion racks