DUUN TF220 Manuale di istruzioni - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per Spazzaneve DUUN TF220. DUUN TF220 17.

Power transmission shaft

The tractor is disengaged and the handbrake is applied

before the shaft is connected to the tractor's PTO.

The maximum power output speed is 540 rpm. The drive

shafts are always to be equipped with original protection

covers.

Damaged and worn covers are to be replaced

immediately!

Make sure that all covers for the shaft are in good condition

and correctly fitted. Never start the machine when this is not

in order. The locking chains for the plastic covers are

always to be fixed to the appropriate brackets in order to

prevent the covers to rotate. The covers must be lubricated

according to the specified interval.

Rotating parts – high risk of injury

The rotating parts of the machine can cause major damage

to body parts that come into contact with them. Do not allow

anybody to stay in the work area when a machine is in

operation.

Hydraulic high fluid pressure

Be careful when you work with hydraulics. Wear eye

protection and gloves. Hydraulic oil under high pressure

may penetrate the skin and cause serious infections. See a

doctor if you have sustained an injury. Make sure no one is

close by when performing hydraulic functions.

Risk of crushing

Case covers and moving parts are preferably marked in

yellow.

All covers must always be used except when necessary

maintenance, and always with a stopped engine as

mentioned in safety in case of interruptions and

maintenance. Pay special attention to clamping risk at

points marked for this. Avoid hydraulic movement of the

ejection spout when there are people nearby.

Never drive with open covers for chains and sprockets.

Chains and sprockets can cause major damage to body

parts that come into contact with them during operation.

Clamping risk when adjusting

When adjusting the support wheels, make sure that you do

not stand with your feet under the wear steel.