Dataplot EMBLEM EASY Airpress standard Manuale operativo - Pagina 7
Sfoglia online o scarica il pdf Manuale operativo per Utensile elettrico Dataplot EMBLEM EASY Airpress standard. Dataplot EMBLEM EASY Airpress standard 20. Pneumatic eyepress
Stampa la pagina4. Machine Operation
4.1 Machine Description
This machine has been designed to set eyelets (grommets) with washers, feeding
the machine by hand, on PVC coated material and in general terms on plasticized
fabrics with a strength of 0,3 - 1,2mm. The maximum cutting diameter is 11 mm.
The machine cuts the material and sets the eyelet in just one operation.
Dataplot GmbH disclaims any responsibility when using the machine for
different uses than the ones covered on this operating manual.
4.2 Checking The Machine Before Starting
Before starting the machine for the first time, or when the location of the
machine is changed, or adjustments or part replacements are made, we advice
customers to check that the machine has not suffered a blow or breakage.
4.3 Eyelet (Grommet) Setting
a) Check that the air inlet valve "F" is on OPEN position (Fig. 14).
b) Place the eyelet (grommet) "O" gently through the puncher "C" of the top die "D" checking
that it stays firmly on the junction area puncher/top die.
c) Place the washer "A" on the bottom die "E" with the teethed surface upwards.
d) Place the banner on the stainless steel plate.
e) Press down manually the safety protection "P", with the black plastic knob placed on
the front and side of the machine until it reaches completely its stroke to set the eyelet.
(C)
(A)
Fig. 7
Fig. 8
(D)
(O)
(E)
Page - 7 -