Dataprobe K-415A Manuale

Sfoglia online o scarica il pdf Manuale per Prese di corrente Dataprobe K-415A. Dataprobe K-415A 4. Remote control power strip

GENERAL DESCRIPTION

The K-415A and K-410A-IEC are four outlet power strips in standard 19", single height rack enclosures

that can be remotely controlled from one of Dataprobe's many remote control systems or from any device

which can provide a simple dry contact closure or open collector control.

For the sake of clarity, both models will be referred to as K-415A in the following text.

REMOTE CONTROL CONNECTION

A 9 pin female D-subminiature connector on the K-415A connects to one of several remote control

products from Dataprobe. Each system is supplied with an interconnect cable suitable for the K-415A,

when both are purchased together. Connect this cable to the K-415A. If no cable was supplied, contact

Dataprobe for the correct cable specification.

The K-415A is factory wired to normally provide power to all the outlets. This is the default condition.

When the control cable removed, all outlets will be power On. The cable is designed to turn power OFF

when a contact closure is made by the relay in the controlling device on the appropriate pins of the control

cable.

REF: PWR\K415_V980130X-081216.DOC

Technical Support Hotline: (201) 967-8788

Technical Support: 201-934-5111

Main: 201-934-9944

Remote Control Power Strip

Models K-415A & K-410A-IEC

Website: dataprobe.com