DUVLAN T03-12 Manuale di istruzioni per il montaggio - Pagina 16

Sfoglia online o scarica il pdf Manuale di istruzioni per il montaggio per Sport e attività all'aperto DUVLAN T03-12. DUVLAN T03-12 19. Ping pong table

Stampa la pagina

STEP 5. (Fig.5.1) Insert the Plastic Leg covers (P11) in the Outer Legs (P13)

Gently hammer into place if needed. Fig.5.1 Represents all the outer legs

STEP 6. (Fig.6.1) Attach the two Plastic Trays (P9) through

holes of the legs using (H6) and (H8) to the two lower Interior legs as shown. (Repeat on the other

side) Secure the top two holes by placing one end of the Support Brace (P4) over the top holes of

the Plastic Tray and attaching them to the Interior Leg using (H6) and (H8) as shown in FIG.6.1.

Attach the other end of the Support Brace to the Exterior Leg using (H4) and (H5). Now secure the

Plastic Tray by adding two (H6) and (H8) hardware parts. Note: Keep in mind that the table is still

up-side-down. So the "lower holes"referred to in Step 6 are closer to the ground in this position.

STEP 4 (Fig.4.1) Attach two Plastic Wheels (P1)using (H1)

and <H2)to hte Wheel Brackets(P2) as shown to the left.

Once the wheels are attach , attach the wheels and bracket to

the Insert for wheel swivel (P3).T he entire unit will then be

inseted into the two Short Inner Legs(Pl4)..

IMPORTANT

The Support Brace (P4) must

be attached with the raised

side facing out. If palced the

other way, the brace will

damage the table when folded

and void your warranty.