Auscrown CS900 Manuale di installazione e funzionamento - Pagina 5
Sfoglia online o scarica il pdf Manuale di installazione e funzionamento per Cappa di ventilazione Auscrown CS900. Auscrown CS900 7. Stainless steel canopy rangehood
Stampa la pagina6. Slide the inner duct cover into the outer duct cover. (See Figure 7)
7. Install the duct covers onto the canopy. (See Figure 8)
8. Draw up the inner duct cover up to the preferred height, and mark down position of screw holes of the duct
bracket onto the wall, then push it down. Drill hole through the marks and insert a expanding tube.
9. Elongate the exhaust pipe and connect to the inlet of the exhaust flue. (See Figure 9)
10. Lift up the duct cover and match the duct bracket keyholes with the expanding tube, and secure with 2
screws. Then pull down the outer duct cover and fit it back onto the canopy. (See Figure 10)
11. Fix the outer duct cover with 2 pieces of M4x10
screw.
12. Plug the power cord into the power point.
Figure 7
Figure 9
Figure 8
Figure 10