ADE M101000-01 Manuale di istruzioni per l'uso - Pagina 4
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Bilance ADE M101000-01. ADE M101000-01 16. Class iii approved scales electronic baby scales
Stampa la pagina
Be sure to read, understand and follow all instructions in this manual and others that accompany the
system and its components, as well as country-specific installation standards, applicable safety
regulations and accident prevention rules.
-
Handle the scale with care and always keep in mind that it is a precision measuring instrument.
-
Make sure that the baby to be weighed is centred on the weighing surface.
-
Do not use the scale if one or more security marks are damaged.
-
The scale may only be operated and maintained by trained and authorised skilled personnel.
-
Before first use, make sure that the mains voltage and current type stated on the name plate
match the mains voltage and current type at the place of use.
-
Never touch baby and mains adapter simultaneous.
-
Only the power adapters authorised by the manufacturer ADE may be used. Otherwise, there is
a risk that other electrical devices will be affected.
-
Anyone connecting additional equipment or power supply to the equipment is responsible that
the system complies with the requirements of the standard IEC 60601-1.
-
The plug/adapter connector isolates the device from the mains supply. Do not place the device
in a position where it is difficult to disconnect the power supply to safely stop the operation of
the device.
-
Make sure that the mains cable is routed between the scale and the mains connection in such a
way that there is no risk of stumbling.
-
Make sure that the mains cable is routed between the scale and the mains connection in such a
way that there is no risk of strangulation.
-
Never push the scale back and forth without lifting, as this may cause damage to the load cells.
-
Operate the device only within the permissible ambient conditions.
-
Do not expose the scale to high temperatures, whether from neighbouring devices or direct
sunlight.
-
Use the scale at constant ambient temperatures and avoid using in draughts, otherwise the
measurement results could be falsified.
-
After storage under extreme conditions, allow at least 60 minutes for the scale to become
acclimatised and ready for use as directed.
-
If possible, place the scale away from other devices or sources that generate electromagnetic
or other disturbances as these can falsify the measurement results.
-
Use only approved accessories and peripherals.
-
Before cleaning the device, disconnect the mains adapter from the mains.
-
Do not immerse the device in water or other liquids.
-
If the scale will not be used for a long time, it should be cleaned and stored in a protective film.
The addition of a drying agent is desirable.
-
Remove the batteries if you are not going to use the scale for a long time.
-
If you have any problems with this device, such as problems with setup, maintenance or use,
please contact your authorised dealer. Do not open or repair the device yourself.
-
Please notify the authorised dealer if unexpected operations or events occur.
DO NOT use the scale:
-
If the mains adapter is damaged;
-
If the battery compartment has an unnatural bulge;
-
After long storage in a humid environment.
In such cases, please contact an authorised customer support.
3
Safety Instructions
M101000-01-210323-Rev005-UM-e