DV8 OFFROAD MTO Series Manuale di installazione - Pagina 10

Sfoglia online o scarica il pdf Manuale di installazione per Automobile Accessories DV8 OFFROAD MTO Series. DV8 OFFROAD MTO Series 13. 2021 ford f-150 front bumper winch & non winch

Stampa la pagina
DV8 OFFROAD MTO Series Manuale di installazione
INSTALLATION
MANUAL
STEP
21
After each bezel is matched up to the
correct location, you need to trim the
tabs on the bezel. Since our bumpers
use a thicker material, you will need
to either use snips or a small Dremel
to shave down the tabs. Take a little
material off and test fit until tabs
click into place and bezel fits flush.
STEP
22
From the back, click each sensor into
the bezel while holding the face of
the bezel. Make sure both tabs on the
bezel are flat against the sensor and
that the sensor is sitting flush in the
bezel.
STEP
23
Install 3" pods into the wings using
hardware provided with the light.
NOTE: We are using two 3" DV8elite pod
lights for this install.
855-680-9595
NEED HELP?