DV8 OFFROAD SPEC Series Manuale di installazione del prodotto - Pagina 7

Sfoglia online o scarica il pdf Manuale di installazione del prodotto per Automobile Accessories DV8 OFFROAD SPEC Series. DV8 OFFROAD SPEC Series 10. Rear bumper for 2018+ jeep jl wrangler
Anche per DV8 OFFROAD SPEC Series: Manuale di installazione (12 pagine), Manuale di installazione (10 pagine), Manuale di installazione (9 pagine)

Stampa la pagina
DV8 OFFROAD SPEC Series Manuale di installazione del prodotto
INSTALLATION
MANUAL
STEP 10 |
Install the gaskets onto
the fender.
The gaskets are notched to line up with
the mounting holes on each fender.
Install the fender flare
onto the vehicle using the provided
M6x20 hardware with a 4mm allen bit.
Secure the front mounting support using
the supplied M6x25 hardware with a 4mm
allen bit and 10mm wrench.
During install, check the gasket on the
fenders and tuck away any extra gasket
using a trim clip tool.
Note: Assistance is recommended to prevent
injury and damage to the product or vehicle.
STEP 11 |
Route and secure the
wiring to your preference and install the
new turn signal into the factory connector.
Repeat process for the other side.
NEED HELP?
855-680-9595