DVC BASLER ACE Manuale di installazione rapida - Pagina 9

Sfoglia online o scarica il pdf Manuale di installazione rapida per Telecamera di sicurezza DVC BASLER ACE. DVC BASLER ACE 14.

Making Changes to the Camera's IP Configuration

You can use the IP Configuration Tool to make permanent changes to the camera's IP

configuration. (Permanent means that the changes will stay in place even when the camera is

reset or switched off and back on.) If you want to change the IP configuration of the camera:

1. Click on the Change Configuration button.

In some cases (such as when the camera's current IP address is misconfigured), a

Force IP window will appear as shown below. The message in the window will

indicate that you must first assign a temporary IP address. If you see this message,

go to step 2.

If you do not see a message about assigning a temporary IP address, go to step 3.

2. Click the OK button in the Force IP window. An Assign Temporary IP Address (Force

IP) window will open as shown below.

Enter an IP Address, Subnet Mask, and Default Gateway. (If you are using the

camera in a peer-to-peer network, you do not normally need to enter a default

gateway.) (Keep in mind that for the camera to communicate properly with the

network adapter to which it is attached, the camera must be in the same subnet as

the adapter and the camera must have a unique IP address.)

Click the OK button.

The camera's IP address will be changed and the Assign Temporary IP Address

(Force IP) window will close.

Go on to step 3.

Quick installation Guide V1

DVC