ADE M403020 Manuale operativo - Pagina 8
Sfoglia online o scarica il pdf Manuale operativo per Bilance ADE M403020. ADE M403020 16. Class iii approved scales electronic chair scales
Stampa la pagina
Menus structure of setting mode:
FILTER
SERIAL
Setting date and time
–
Enter the CLEAR key for approx. 4 sec; FILTER appears on the display.
–
Press key "6" six times and TIME appears on the display.
–
Press ENTER key and SHOW appears on the display.
–
Press key "6" one time and HOUR appears on the display.
–
Press ENTER key and set the hours using the arrow keys "2", "4", "6" and "8".
–
Press the ENTER key and set the minutes and seconds.
–
Go back by pressing key "2"; TIME appears on the display.
–
Press key "6" one time and DATE appears on the display like the time entry.
–
Press key "2" two times and EXIT Y appears on the display.
–
Confirm with ENTER and date & time are set.
Positioning of patient
Please ensure for security reasons that all brakes at the wheels are being locked. Move the armrest and foot-
rest in an upright position before the patient is being moved onto the scale. Fold down the armrest and foot-
rest and place the feet of the patient upon the footrest.
After finishing the weighing procedure please make sure, that arm- and foodrest are being moved
again into the upright position before patient stand up again.
Armrest and footrest are not to be used as helping device for getting up from the chair!
They are to be understood as supporting device for arms and legs only in order to allow an ac-
curate weighing procedure!
Weighing
Press the ON key for at least 3 seconds to turn the scales on. An automatic function test is carried out after
being switched on. This test is completed when the display shows zero. The scale is now ready for the weigh-
ing procedure.
Resetting the scales back to zero
Wait until the standstill status indicator
cies after switching on the scale are being compensated. The zero key restarts the scale. The status indicator
(6) appears when the scale is being resetted.
Tare function
The TARE key (9) is used when the patient is being weighed with other items (e.g. clothing, shoes or other
items) which should be ignored by the scale. To do this, weigh these items first. After the weight is displayed,
press the TARE key (9) to reset the display back to zero. The display changes to net mode (NET status indica-
tor (5) is on). The weight of the previously weighed and saved items is ignored when the patients' weight is
displayed. Enter the tare button again to get back to the normal weighing mode and remove any load from the
platform.
8
PROGR
PFORMT
SETPTS
(14) appears. By pressing the ZERO key (8), measuring inaccura-
TEST
TIME
Operation
DATE
VERS
M403020-210322-Rev006-UM-e