Cooey WHT1-808-B Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Monitor della pressione sanguigna Cooey WHT1-808-B. Cooey WHT1-808-B 17.

BEFORE YOU START
Pair up the Blood Pressure Monitor
with Your Device
With the advanced Bluetooth 4.0 technology applied, the
mobile or portable equipments, which are equipped with
Bluetooth function in line with BLE Technical Specifications
as well as BLP Protocol established by global organization
Bluetooth SIG, are capable to receive your personal health data.
Download the TransHealth APP from the APP Store or Google
Play.
(1) Turn on Bluetooth and the app. Make sure both are
on when pair-up is proceeding.
(2) When the monitor is off, press and hold the User 2
button to start pair-up. The symbol
will be shown on the LCD alternatively, indicating
pair-up is proceeding.
(3) Then please select the user ID you want to connect
with your smartphone on the app to continute the pair-up.
If succeed, symbol
will be shown on the LCD.
If fail, symbol
will be shown on the LCD.
(4) The monitor will shut off automatically after pair-up
process is complete.
Bluetooth Module No. : AW8001
Frequency Range
2.402 - 2.480 GHz
Output Power Range
0 dBm
12
and the symbol
Supply Voltage
1.8-3.6 V
Transmitting Distance
10 meters

Tie the Cuff

1. Remove all accessories from your left arm.
If your physician has diagnosed you with poor
circulation in your left arm, use your right arm.
2. Roll or push up your sleeve to expose the skin.
3. Apply the cuff to your left arm with your palm facing up.
4. Position the edge of the cuff about 2-3 cm.
5. Fasten the arm cuff around your arm, leaving no extra room
between the cuff and your skin. If the cuff is too loose, the
measurement will not be accurate.
6. Correct Posture for Patients with Hypertension, especially for
Hypertension patient
- Bare your arm or wear tights only when starting measurement.
- Sit comfortably with legs uncrossed, feet flat on the floor, back
and arm supported.
The central of the cuff should maintain at the same level as the
right atrium of the heart.
Resting for 5 minutes before measuring.
Wait at least 3 minutes between measurements. This allows your blood
circulation to recover.
For a meaningful comparison, try to measure under similar conditions. For
example, take daily measurements at approximately the same time, on the same
arm, or as directed by a physician.
BEFORE YOU START
13