ADE M501020 Manuale operativo - Pagina 6

Sfoglia online o scarica il pdf Manuale operativo per Bilance ADE M501020. ADE M501020 20. Electronic wheelchair scales

Stampa la pagina
ADE M501020 Manuale operativo
No. Name
1
Display
2
Battery charge level
3
Switching points 1 & 2
BMI status indicator
4
(HI, OK, LO)
5
Net status indicator
6
Status indicator
7
Hold
8
On/off, zero
9
Tare
10
Preset tare
11
BMI
12
Units
13
Number pad
Special function:
"0" key
"Enter" key
Standstill status indica-
14
tor (14):
15
Hold
16
Ib
17
oz
18
kg
g

Indicator and operating controls

The blue symbols under the keys (up, down, left, right) describe the key functions in configuration and
setting modes. These keys are used to navigate through the menus, to select numerical values and to
increase or lower the values.

Features

–
Large, 6-digit LCD display, digit height 21 mm.
–
Either battery operation or mains operation.
–
Integrated charging function.
–
Supply for four 350 Ω or eight 700 Ω weighing cells.
–
An RS-232 interface, full-duplex, with configurable address (for PC connection).
–
An RS-232 interface, semi-duplex (for printer connection or remote display).
–
One print format (500 characters).
–
Power save mode (adjustable unit shutdown, adjustable shutdown of the background light).
6
Function
LCD display for indicating weight, as well as showing the mode and
configuration information.
Status indicator for the current battery charge level.
Status indicator for switching points 1 & 2.
Status indicator, automatic BMI (Body Mass Index) evaluation.
LCD on - net weight is shown on the display.
LCD off – gross weight is shown on the display.
LCD on - the weight is within ¼ of a calibrated value from the zero
point.
LCD off - the weight is outside ¼ of a calibrated value from the zero
point.
Press to activate the hold function.
Turns the unit on and off or re-sets the display.
Press to tare the scales.
Press briefly to access the tare function.
Press for a long period to enter and save the tare value.
Press to access BMI mode and to enter the height. Press again to
return to weight mode.
Press to change between primary and secondary units.
Figures 0-9, Clear, Enter. - Navigation functions:
In weight mode, you can change between gross and net weight using
figure "0" (if the scales have been tared).
Function in weight mode: "Print".
The scales are at standstill (precondition for functions such as
resetting, printing and taring).
LCD off: The scales are not at standstill
Status indicator, LCD on - display frozen.
Status indicator, LCD on - the weight is shown in pounds.
Status indicator, LCD on - the weight is shown in ounces.
Status indicator, LCD on - the weight is shown in kilograms.
Status indicator, LCD on - the weight is shown in grams.
Key 6 means to the RIGHT
Key 4 means to the LEFT
Key 8 means DOWN
Key 2 means UP
M501020-210322-Rev006-UM-e