Agri-Fab 45-0382 Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Spreader Agri-Fab 45-0382. Agri-Fab 45-0382 13. 125 lb. broadcast spreader owners manual

ASSEMBLY INSTRUCTIONS

TOOLS REQUIRED FOR ASSEMBLY

(1) Pliers

() 7/16 in. open or boxed end wrenches

1. Remove the spreader, the loose parts and the hardware

package from the carton. Lay out parts and hardware

and identify using the illustrations on pages and 3.

. With the spreader resting upside down on the top of the

hopper, assemble a 5/8 in. flat washer, a spacer and

a second 5/8 in. flat washer onto each end of the axle.

See figure 1.

FIGURE 1

3. Place a wheel onto each end of the axle. The long end

of the hub goes to the inside. See figure 2.

4. Assemble a 5/3 x in. cotter pin through the hole in

one wheel hub and the axle. See figure 2.

5. Place a 5/8 in. flat washer onto each end of the

axle and secure with a 9/64 x 1-1/ in. cotter pin.

See figure 2.

ENGLISH

SPACER (N)

5/8 in. FLAT WASHER (H)

45_0382Fig1

5/32 x 2 in.

COTTER PIN (I)

FIGURE 2

6. Install an upper handle to each lower handle using four

1/4 x 1-1/ in. bolts and nylock nuts. Do not tighten at

this time. See figure 3.

1/4-20 x 1-1/2 in.

FIGURE 3

9/64 x 1-1/2 in.

COTTER PIN (J)

5/8 in. FLAT

WASHER (H)

HEX BOLT (B)

1/4-20 NYLOCK

NUT (E)

45_0382Fig2

45_0382Fig3