Datavideo SE-1000 Manuale supplementare - Pagina 7

Sfoglia online o scarica il pdf Manuale supplementare per Monitor Datavideo SE-1000. Datavideo SE-1000 7. Datavideo se-1000 switcher: supplementary guide
Anche per Datavideo SE-1000: Manuale di riferimento (4 pagine)

Stampa la pagina

1) Connect your cables as shown in the diagram above. DVD

players usually do not have SDI outputs, so a Component-to-SDI

converter will be needed to connect the DVD player to the SE-1000.

Also, Mediashout will be run from the computer and connected to the

switcher via the DVI input.

2) Conﬁ gure the switcher for your input signal type.

Press FUNC & SETUP and select the F1 setting

SETUP

FUNC

"FORMT 4/15". Select the incoming signal type,

PGM

in this case

"480/59i",

then press the F4 knob to

conﬁ rm your selection.

3) Go to the "Format/Standard Converter" above the T-bar. Turn the

dial to "CH1" and press the dial to conﬁ gure Channel #1. Note: We

are conﬁ guring the internal converter output signal type. It will auto-

detect the input signal type.

4) "F1" under CH1 sets the output to SD or HD

CH1

FN01

by pressing the selector and turning it to cycle

the setting. To deselect the function, press the

knob and turn the dial to "F2".

5) "F2" under CH1 sets the

FORMAT/STANDARD

signal output type depending

CONVERTER

on whether "F1" is set to HD

or SD. To make changes to

the signal output format,

press the knob and select "480iCVBS". This setting is

required if you are using TLM-433 monitors.

SE-1000 Applications

Integrating a DVD Player and Mediashout

Preview Signal

FORMT

| MODE

4/15

| 480/59i

CH1

FORMAT/STANDARD

CONVERTER

Program Signal

6) The ﬁ nal step requires us to

conﬁ gure the button crosspoints.

Press FUNC and XPT to enter the

crosspoint setup. Turn the F1 dial

to "XPTAS 2/3" and set the

crosspoints as follows:

XPT 1 = IN1

XPT 2 = IN2

XPT 3 = IN3

XPT 4 = IN4

XPT 5 = DVI

| EXEC

XPT 6 = BLK

XPT 7 = CBAR

7) To conﬁ gure the switcher's

DVI computer input, press

FUNC and SETUP to enter the

setup menu. Rotate the F1 knob

until "DVIIN 2/15" is displayed.

Most computer sources will

work best with "ANLG" and "FULL" selected. Recommended screen

resolution is 1024x768.

Please note that in this setup, the computer monitor will be used to

monitor Mediashout, as the six video monitors included with the

SE-1000 kit are being used to monitor the 3 cameras, DVD player,

FN02

preview, and program outputs.

480i

CVBS

XPTAS

| XPT

| SIG

2/3

IN1

DVIIN

| MODE

| SCAL

2/15

| ANLG

| FULL