Datavideo TLM-170PM Manuale di istruzioni - Pagina 17

Sfoglia online o scarica il pdf Manuale di istruzioni per Monitor Datavideo TLM-170PM. Datavideo TLM-170PM 20. 17.3” full hd lcd monitor

TLM-170PM: Fitting the monitor to a 19" Rack

The TLM-170PM is designed to rack mount. When folded away it is 1U high, please bear in mind that when

opened for operation the monitor is 7U high, so leave adequate room above for this.

The monitor arrives already fitted with sliding rack rails, these have a length adjustment at the rear to suit the

distance between the front and rear rack rails of your cabinet.

To adjust the length loosen the four adjustment nuts as illustrated below, and pull the side rails back as far

as is required. Then re-tighten the nuts.

Mount the monitor in your rack with the rear panel facing upwards. Ensure the rack mounting screws are

secured both front and rear.

Once mounted and secure to the rack, unscrew the two locking screws on either side of the front panel, and

pull the monitor forward using the handle. Once the monitor is fully forward simply hinge it up into a vertical

position.

To fold away, pull the top of the monitor forward, so that it hinges down to a horizontal position, then push it

back into the rack until you are able to screw in the locking screws.

N.B. When folding the monitor away be careful not to trap your fingers or scrape your hand on the rack

cabinet.