AUSTEM ESS 3kW Manuale di installazione e funzionamento - Pagina 6

Sfoglia online o scarica il pdf Manuale di installazione e funzionamento per Alimentazione AUSTEM ESS 3kW. AUSTEM ESS 3kW 20.

Stampa la pagina

3.1 Moving a product

It is important to lock the cover before moving.
Incorrect handling can cause damage to the product or accidents.
Caution

3.2 Installation

[Place of installation]
Information to keep in mind when installing the product.
•
Avoid places where humidity is high and moisture penetration is may be concerned.
• Avoid
places where explosive gas, flammable gas, liquid or dusty.
•
Avoid places where difficult to repair and check.
• Avoid places where difficult to dissipate heat by the product.
•
Avoid places where easy to be affected by noise, or difficult to separate from device.
[Ambient
temperature]
•
To maintain the product stable for a long period of time, the ambient temperature should be
carefully monitored. Generally temperature is allowed -10°C to +40°C, install in a place that satisfied
these conditions.
•
If the ambient temperature exceeds this range(10°C to +40°C) due to the heat from operation, cool
it with a cooling equipment.
•
PCS dissipate heat from operation, please secure enough space to prevent thermal saturation.
[Humidity]
• If humidity is high, it may cause oxidation corrosion of the metal parts and insulation failure may
occur.
•
Install in a place where the relative humidity is less than 95% and be caution to prevent
condensation.
[Installation environment]
•
Install in a place free from flammable gas, corrosive gas, oil or water.
C
dust such as iron powder to enter.
A
[Vibration]
•
Install in a place with low vibration.
U
•
Install in a place where the vibration acceleration is 20 ~ 50Hz (less than 0.2G) less than 20Hz(less
T
than 1G).
I
•
When installing in a place with large vibration such as vibrator, carrier, etc. Take anti-vibration
O
measures by using anti-vibration rubber.
N
[Space]
•
Ensure sufficient space around the installation site to prevent the cooling effect of the product from
deteriorating.

3. Installation and wiring

Also, do not allow conductive