DVIGear DVI-7200-PS Series Manuale di avvio rapido - Pagina 3

Sfoglia online o scarica il pdf Manuale di avvio rapido per Alimentazione DVIGear DVI-7200-PS Series. DVIGear DVI-7200-PS Series 4. Distribution power supplies

Stampa la pagina

Distribution Power Supplies

1. Power LED

2. AC Power Input

3. Power Switch

4. DC Power Outputs

10x Outputs

20x Outputs

5. Airflow Intake

6. Airflow Outlet

7. Rack Mounting Ears

Note 1: All DC outputs utilize locking connectors to

ensure secure connections and stable system operation.

Note 2: Warning, in order to ensure proper operation

and long term reliability, care must be taken to ensure

that the airflow is not restricted in any way.

Installation

1.)

Install the distribution power supply in a rack mount environment using mounting ears. Care

must be taken to ensure that the airflow is not restricted in any way.

2.)

Connect the AC power input cable to a power source and to the distribution power supply.

3.)

Connect devices to be powered to the DC outputs of the unit using the appropriate power

supply extension cables, see page 4.

4.)

Turn the distribution power supply on using the Power Switch at the rear of the unit. Check to

make sure the power LED on the front panel is lit and the cooling fans are operating.

5.)

The unit is ready for use.

Note 3: Warning: Models DVI-7230-PS and DVI-7235-PS provide +12VDC outputs. Take care to avoid

connecting any 5VDC devices to these +12VDC outputs as this may cause damage and system failure.

Quick Start Guide

Continuously lit when unit is receiving power and switched ON.

Connect supplied AC power cord securely to unit.

This switch turns the unit ON / OFF; lights green when turned ON.

(1)

+5 VDC Models

Allows airflow into the device.

Two internal cooling fans output airflow here.

Rack-mountable in a standard 19-inch equipment rack.

DVI-7200-PS Series

DVI-7220-PS

DVI-7225-PS

(3)

+12 VDC Models

DVI-7230-PS

DVI-7235-PS

(2)

Air ow Diagram