Datavideo RMC-180 Manuale di istruzioni - Pagina 12

Sfoglia online o scarica il pdf Manuale di istruzioni per Controllore Datavideo RMC-180. Datavideo RMC-180 19. Ptz camera control unit
Anche per Datavideo RMC-180: Manuale di istruzioni (13 pagine), Manuale di istruzioni (16 pagine), Manuale di istruzioni (16 pagine)

Stampa la pagina

FN6. POWER

FN6 powers the connected PTC-150 camera ON / OFF. While executing, the camera is either

rebooting or shutting down.

FN7. SCREEN MODE

The screen mode allows the user to set different mirror settings as follows.

• H+V: Horizontal and vertical image flip

• H: Horizontal image flip

• V: Vertical image flip

• OFF: Normal

FN8. MEMORY SPEED

FN8 allows you to adjust the Pan Tilt and Zoom speed of the PTZ setting stored. The speed range is

1-18.

FN9. TALLY LED MODE

There are generally two tally LED modes, which are Tally User and Tally Input. The Tally User mode

allows the user to directly control the camera tally light. In this mode, the user can toggle between

Tally Off, Tally Red and Tally Green.

The Tally Input mode is selected when the RMC-180 is connected to the tally output of a

compatible Datavideo Switcher such as the HS-2000 or HS-2200.

FN10. R/B Gain Adj

FN10 allows the user to manually adjust the white balance setting. However, before you use this

function, please make sure Button B is enabled (Button LED ON). Once in the R/B Gain Adjustment

mode, the user will be able to adjust the R-G and B-G values which range from 00-FF (Hex number)

"WBAL. Is not Manual" will be displayed on the LCD panel if one of buttons "A" and "ATW" is

enabled.

FN11. FIRMWARE VER.

FN11 displays the RMC-180 firmware version.

FN12. CAM INFO.

FN12 displays camera information such as Vendor ID, mainboard firmware version, FPGA version,

and motor version.