ADE PFA Series Manuale operativo - Pagina 6

Sfoglia online o scarica il pdf Manuale operativo per Bilance ADE PFA Series. ADE PFA Series 15. Electronic precision scale

Both, in mains and in battery operation, switch-on the scale using the right hand on the membrane

keyboard arranged ON-/Off-key.

The test routine starts with the indication of type and version number and starts thereupon to run

downward from 999999 till 000000; a peep-tone confirm the end of the pass.

The scale will show the battery charge condition for a while before switching to weighing mode.

To achieve precise measuring results the scale should be switched-on about 30 minutes before

starting the weighing procedure to get working temperature.

In case the scale should not automatically reach the zero position, the Zero-key have to be

depressed. By pressing the Zero-key, the measuring inaccuracies will be compensate and set to

zero before the actual weighing procedure.

Zero setting will be indicating in the display by -0-. This indication effects only when the weighing

platform is unloaded.

The scale is now ready for operation.

With the assistance of this function, you can balance weighing goods together with other objects

(e.g. bowl, foil, tissue etc.) without impairment of the weighing result for the weight of these objects.

1. For this operation switch-on the scale and wait until the test routine ends.

If necessary, adjust the scale to zero by pressing the Zero-key.

In the display appears the zero symbol as well as the indication that the weight indication is

stable.

2. Place the object to tare (e.g. bowl, foil, tissue etc.) on the weighing platform.

Press the Tare key to tare the object. The Display shows 0,0 and „Net" appears.

3. Place the object to weigh additionally on the weighing platform.

4. The indicated weight in the display is the net weight of the added weighing good.

The scale has a tare-storage at one's disposal.

When repeated weighing operations with the same object to tare will be performed (e.g. always with

the same bowl) the scale deducts automatically the stored weight and the net weight of the

weighing goods appears in the display. When the tared object (including the weighing goods) will

taken-off the platform, the tared weight appears as negative value. If the scale will be switched-off

or disconnected from the voltage supply, the data content of the tare-storage will be deleted.

Shall the tare value be revised or cleared remove the weighing goods completely and press the

Tare key again. Now the display indicates 0.0 and „Net" expires.

OPERATION OF THE SCALE

PFA-200702-Rev004-UM-en