4qd PRO-160-HC Manuale di istruzioni - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per Controllore 4qd PRO-160-HC. 4qd PRO-160-HC 16.
Anche per 4qd PRO-160-HC: Manuale di istruzioni (16 pagine)

Stampa la pagina

Thermistor input

Can be used to connect 1 or 2 sensors to monitor external temperatures.

Sensor X is connected to C and D, Sensor Y to A and B.

Once the sensors have been installed they must be enabled in the profile menu.

Radio Control Input and BEC

The Pro-160 will accept a standard hobbyist radio control servo signal directly

from a receiver. The receiver should be connected to pins B, C, and D. Pin D is

linked to pin A by Lk1, this can be removed if a 4 wire radio connection is

required.

The Pro-160 is pre-programmed to work with the majority of radio receivers.

Profiles 7 and 8 are configured for RC single ended and RC joystick use.

Depending on your radio system you may need to use the RC learn function to

properly match the Pro-160 to your receiver output.

PRO-160 V2.3/2 04/20

Sensors X and Y should be 4QD

part number SEN-TMP.

Page 5