Cooke & Lewis GASUIT4 Manuale - Pagina 12

Sfoglia online o scarica il pdf Manuale per Piano cottura Cooke & Lewis GASUIT4. Cooke & Lewis GASUIT4 20.
Anche per Cooke & Lewis GASUIT4: Manuale (10 pagine)

Stampa la pagina

Connecting to the electrical supply

All installation must be carried out by a qualified electrician. Before connecting the mains supply

ensure that the mains voltage corresponds to the voltage on the rating plate.

Direct Connection

The appliance must be connected directly to the mains using an omnipolar circuit breaker with a

minimum opening of 3 mm between the contacts.

The installer must ensure that the correct electrical connection has been made and that it complies

with the wiring diagram.

The cable must not be bent or compressed.

Regularly check the power cord for damage. If the supply cord becomes damaged, it must be

replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid

a hazard.

WARNING: This is a Class I appliance and MUST be earthed.

This appliance is supplied with a 3 core mains cable coloured as follows:

Brown = L or Live

Blue = N or Neutral

Green and Yellow = E or Earth

EUR

(Blue)

(Brown)

(Green/Yellow)

This appliance requires a 3 amp Miniature Circuit Breaker.

To avoid the risks that are always present when you use an electrical appliance it is important that

this appliance is installed correctly and that you read the safety instructions carefully to avoid misuse

and hazards. Please keep this instruction booklet for future reference and pass it on to any future

owners. After unpacking the appliance please check that it is not damaged. If in doubt, do not use the

appliance but contact Customer Services - see end of Care & Maintenance section for details.

TRAG10578 - 200000002 - 4 Burner Gas v3d Rv3.indd 12

DOUBLE POLE SWITCHED

FUSED SPUR OUTLET

FUSE ON

USE A 3AMP FUSE

13/06/2017 16:45