Cooke & Lewis 5059340094090 Manuale - Pagina 4

Sfoglia online o scarica il pdf Manuale per Forno Cooke & Lewis 5059340094090. Cooke & Lewis 5059340094090 7.

Stampa la pagina

Safety

Installation

All installation must be carried out by a competent

person or qualified electrician. Before connecting

the mains supply ensure that the mains voltage

corresponds to the voltage on the rating plate.

Direct Connection

• The appliance must be connected directly to

the mains using an omnipolar circuit breaker

with a minimum opening of 3 mm between the

contacts.

• The installer must ensure that the correct

electrical connection has been made and that it

complies with the wiring diagram.

• The cable must not be bent or compressed.

• Regularly check the power cord for damage. If

the supply cord becomes damaged, it must be

replaced by the manufacturer, its service agent

or similarly qualified persons in order to avoid a

hazard.

WARNING: This is a Class I appliance and

MUST be earthed.

• The appliance is supplied with a 3-core mains

cable and must be connected to the electricity

supply via a double pole switch having a 3 mm

minimum contact gap on each connector.

• This appliance requires a 25 Amp Miniature

Circuit Breaker (MCB).

201693_s1_s2-5059340094090-C&L-A4-IM-Safty-V02.indd 4

The wires in the mains lead are coloured in

accordance with the following code:

Brown = L - Live

Blue = N - Neutral

Green and Yellow =

-Earth

DOUBLE POLE SWITCHED

FUSED SPUR OUTLET

FUSE ON

USE A 25 AMP FUSE

To avoid the risks that are always present when

you use an electrical appliance it is important that

this appliance is installed correctly and that you

read the safety instructions carefully to avoid

misuse and hazards. Please keep this instruction

booklet for future reference and pass it on to any

future owners. After unpacking the appliance

please check that it is not damaged. If in doubt,

do not use the appliance but contact Customer

Services -see end of Care & Maintenance section

for details.

13/2/2020 6:02 PM