Dateq XTC II Manuale - Pagina 11

Sfoglia online o scarica il pdf Manuale per Attrezzature per DJ Dateq XTC II. Dateq XTC II 19.

DATEQ XTC II manual

Software setup

Because the XTC II is a digitally controlled mixer it is possible to adjust some user

settings. Before settings can be adjusted, the setup-mode has to be accessed.

In order to activate the setup-mode the setup-button has to be pressed together with the

to be adjusted setting. The LED besides the setup-button will light-up solid.

Some LEDs on the front will light up, or start to blink. These LEDs indicate the functions

that can be adjusted, and their status (enabled or disabled). A blinking LED means that

the function is disabled; a solid LED means that a function is enabled. Releasing of the

setup-button will end the setup-mode and the settings will be stored.

∞

In table below the adjustable settings are summed up.

LEDs

Crossfader routing:

Solid/ blink

A-1, A-2, B-3, B-4

Limiter

Solid/ blink/ Off

FX-1

Limiter

The XTC II has a build-in limiter. As soon as the output level of the console crosses the +6dB

threshold, the limiter will respond with slowly decreasing the level. This way a good the quality and

dynamics of the audio signal will be guaranteed for a longer period, and the connected

apparatuses will be protected against overload conditions.

The limiter can be enabled and disabled in setup-mode. However it is also possible to apply an

internal hardware link by which the Limiter can no-longer be disabled (Limiter-lock).

Possible

Adjust with

status

CUE-1,2,3,4 button Solid:

FX-1 button

Setting description

active routing

Blink:

No routing for this channel

All 4 blink:

Crossfader is disabled

The limiter is enabled.

Solid:

Blink:

The limiter is disabled

Off:

The limiter is enabled by hardware,

and can not be disabled in setup-mode

(Limiter-lock).

Setup