DW DWC-VFHMW Manuale di avvio rapido - Pagina 2
Sfoglia online o scarica il pdf Manuale di avvio rapido per Fotocamera digitale DW DWC-VFHMW. DW DWC-VFHMW 2. Hanging mount for vandal dome, turret and fisheye cameras
Stampa la pagina
INSTALLATION
1
Secure the hanging mount to the pole (NTP ¾ thread).
2
Before attaching the camera to the hanging mount, remove the dome
from the camera base.
3
Pass wires through and make all necessary connections.
4
Use the camera mounting screws (included with bracket) to secure
the camera to the mount cap. See the table below for the length of the
screws
and
Screw size
Compatible camera
DWC-MV8 and DWC-MPV8 models
20mm screws
DWC-MVC and DWC-MPVC models
DWC-PVF and DWC-PPVF models
DWC-MF and DWC-MPF models
DWC-VA models
23mm screws
DWC-MVA models
DWC-MPVA models
35mm screws
DWC-MVD and DWC-MPVD models
6
Adjust the camera lens module's position and secure the dome cover to
the camera. See the camera's QSG for camera setup information.
* NOTE:
How to tell what MF, V8 or PVF hardware you have:
If the camera's mounting holes are located on the outer edge
of the camera's base, use the 20mm screws WITHOUT the
washers.
If the camera's mounting holes are located on the inner edge
of the camera's base, use the 20mm screws with the rubber
washers included.
Rev: 11/22
compatible
cameras.
Quick Start Guide
Pipe
NTP 3/4 TAP
Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.
Mount Cap