AUSTRALIAN MONITOR QF6WRC Manuale di installazione e funzionamento - Pagina 6
Sfoglia online o scarica il pdf Manuale di installazione e funzionamento per Altoparlanti AUSTRALIAN MONITOR QF6WRC. AUSTRALIAN MONITOR QF6WRC 13. Water resistant ceiling speaker
Anche per AUSTRALIAN MONITOR QF6WRC: Manuale di installazione e funzionamento (12 pagine)
Stampa la pagina
MOUNTING
When mounting QF6WRC speakers the following safety issues must be considered;
The mounting of a permanently installed speaker may be dangerous unless undertaken by a qualified professional
with relevant experience.
Ceilings and mounting surfaces must be capable of supporting the speaker in a safe and secure manner.
INSTALLATION
(Refer to page 8 for dimension details)
Cut a hole with a diameter of 209 mm (8.3") in the ceiling ensuring that there is sufficient room both above and at the sides
of the hole to comfortably fit the speaker.
To install the speaker, remove the grille by placing a screwdriver into the three grille release tabs (slots) located around the
circumference of the front panel and carefully prying it free. Take care not to scratch the panel with the screwdriver.
Once the grille and front panel have been removed, simply insert the speaker into the ceiling and using a screwdriver, tighten the
three mounting tabs located around the circumference of the speaker to lock it into place. Once the speaker is installed, relocate
the grille and front plate by securely pressing it back into place.
When wiring the speakers, always connect multiple speaker in parallel and ensure the correct polarity of each speaker, with
respect to each other is maintained. Isolate unused wires in the speaker input cable so that they do not contact each other
or any other conductive object.
NOTE that the QF6WRC has a supervisory capacitor inserted across all 100V tappings.
6
QF6WRC INSTALLATION AND OPERATION MANUAL