CookStar PROX61 Manuale di istruzioni per l'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Piano di cottura CookStar PROX61. CookStar PROX61 9. Induction pro portable induction cooktop

Stampa la pagina

Using Your CookStar Induction Pro Cooktop

1. Once installed according to the instructions in this manual, plug the power cable into a properly

grounded power outlet. The indicator light for power will light up and the cooktop will emit an

audible signal. The cooktop is now in standby mode.

2. Place a suitable cooking pot or pan onto the center of the CookStar cooking field.

3. Press the Power button to turn the unit on (an audible signal will sound, then wait a couple

seconds). Press the Up button to start cooking at power level 1, or the Menu button to start

cooking at power level 5. Alternatively, you may press the Keep Warm button to activate the

"keep warm" function, which will maintain a constant temperature of 140°F.

You can use the Up or Down buttons to adjust the power level setting from 1 to 9.

•

To cook according to temperature, press and hold the Menu button until the LED display

•

changes from power level to temperature. Once the display has been switched to the

temperature mode, the cooktop can be set at the following temperature levels: 155°F,

Insert remaining temp levels

•

NOTE: When switching from power level to temperature mode, the indicated

temperature does not correspond to the power level previously selected. The

temperature is measured by a sensor under the glass-ceramic plate so that the

displayed temperature can differ from the temperature inside the pot.

•

NOTE: As the temperature limit of

particularly rapidly when frying with very little fat, you should switch to the

"temperature" mode for frying. The upper temperature limit for this mode is

For standard cooking we recommend you use the power steps 1-9 as you would on

a conventional cooktop.

Using the Integrated Timer

1. With the unit powered on and the power level or temperature set, press the Menu button

once. The timer display will begin flashing.

2. Use the Up and Down buttons to select the time desired. Once the desired time is reached,

the timer will start when the display stops flashing, after no button has been pushed for a

short amount of time .

3. When the time has elapsed an audible signal sounds and the cooktop automatically

switches to standby mode.

•

NOTE: During timer operation the duration can be changed at any time with

selection buttons. Due to the cooktop's memory feature the set temperature level /

power steps remains unchanged.

Using the "Keep Warm" Function

With the unit powered on, press the Keep Warm button to activate the "Keep Warm" function, which

will maintain a constant temperature of 140°F. To turn the function off, press the Keep Warm button

again. The unit is on Keep Warm, it will shut off after 2 hours as a safety precaution.

170°C

at the bottom of the pan is reached

220°C.