brennenstuhl 1173143600 Istruzioni per l'uso

Sfoglia online o scarica il pdf Istruzioni per l'uso per Riflettore brennenstuhl 1173143600. brennenstuhl 1173143600 2. Multi battery led hybrid spotlight

Stampa la pagina

Operating instructions

If the floodlight is connected to the mains, the rechargeable battery is not charged.

If the floodlight is connected to the power supply, the floodlight is operated with mains voltage by default.

In case of power failure or if the device is unplugged from the mains, the floodlight will automatically switch to battery

operation if a rechargeable battery with sufficient charging is inserted into the battery holder. This is signalled by the

floodlight flashing three times.

CHARGING THE RECHARGEABLE BATTERY

Only use one of the manufacturer's original charging device: Bosch, Dewalt, Makita, Metabo (CAS), Milwaukee.

TRIPOD MOUNTING

By means of the holes in the holding bracket, the floodlight can be mounted on a Brennenstuhl tripod.

SCOPE OF DELIVERY

Floodlight, plug-in connection cable, 4 multi adapters: Bosch, Makita, Metabo,

Milwaukee/Dewalt, bag.

ACCESSORIES

Suitable accessories are available on our homepage www.brennenstuhl.com.

CLEANING

Before cleaning, disconnect the product from the power supply. Do not use solvents, caustic cleaning agents or similar products.

Only use a dry or slightly moistened cloth for cleaning.

MAINTENANCE

ATTENTION: The LED lamp does not contain components that require maintenance.

The light source of this lamp cannot be replaced. If the light source has reached the end of its service life, the entire lamp

has to be replaced. The lamp may not be opened.

EU DECLARATION OF CONFORMIT Y

The declaration of conformity is deposited with the manufacturer.

DISPOSAL

Dispose of electric appliances in an environmentally friendly manner!

Electric appliances must not be disposed of in household waste!

The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment rules that used electric

appliances should be collected separately and recycled in an environmentally friendly manner.

For possibilities of disposal of the used appliance, please contact your local or municipal administration.

MANUFACTURER

Hugo Brennenstuhl GmbH & Co. KG, Seestraße 1-3 · D-72074 Tübingen

Brennenstuhl UK Ltd., No 1 Royal Exchange · London EC3V 3DG, UK

For more information, we recommend the Service/FAQs section on our homepage www.brennenstuhl.com.

MULTI 6053 MH

Attention: Before using the product, please carefully read the operating instructions and store them in a proper location!

SAFET Y INSTRUCTIONS

• Always check the product for damage before use.

Never use the product in case of any damage. In case you find the product to be damaged, please refer to an electrician

or the manufacturer's service address.

• Do not use the product in potentially explosive atmospheres – danger of death!

• Keep the floodlight away from children.

Children are not aware of the risks posed by electric current.

• For operating the floodlight, only use original rechargeable batteries of the following manufacturers:

Bosch, Dewalt, Makita, Metabo (CAS), Milwaukee.

Use of other rechargeable batteries may cause damage.

Only use the supplied connection cable to operate the hybrid function.

• Please never look directly into the light.

• A destroyed protective cover cannot be replaced. The floodlight has to be disposed of.

• The outer flexible line of this lamp may be exchanged and is available as accessory.

• The product is not IP65-compliant (dust-protected and protected against splashing water)

- with removed battery protective cover.

The protective cover can only be used up to and including ProCORE 18 V 8.0 Ah.

Without closed protective cover IP20.

TECHNICAL DATA

Protection class:

IP class/shock resistance:

Temperature range:

Connection cable:

Mains plug:

Operating instructions

Multi Battery LED Hybrid Spotlight

MULTI 6053 MH

Non-compliance poses a risk of fatal injury from electrical current!

Hot surface.

Not suitable for applications with external dimmers.

If the minimum distance is not complied with, illuminated objects may overheat.

IP65, IK08

-10 °C to +40 °C

H05VV-F 2x1.0

GB (IP20)