Austria Email KRU 1020 Manuale di istruzioni per l'uso - Pagina 13

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Scaldabagno Austria Email KRU 1020. Austria Email KRU 1020 14. 5/10l

goods have been delivered shall apply.

14. For the attainment of claims in accordance with Austrian product liability legislation, it should be noted

that:

Any possible claims from the product liability stated above which deal with damage caused by a failure

of a product (e.g. a person receives bodily injury, health is damaged or some other bodily part is

damaged by the product), are only justified when all the prescribed measures and requirements which

are needed for error-free and standard compliant operation of the device have been fulfilled. This

includes for example the mandatory and documented replacement of the anode, connection to the

correct operating voltage, damages arising from improper operation are to be avoided etc. These

provisions are to be derived from the fact that, had all instructions been complied with (standards,

installation and operating instructions, general guidelines etc.) the fault in the device or product that

caused the secondary damages would not have arisen. Furthermore, it is indispensable that the

necessary documentation, such as for example the designation and manufacturer number of the storage

tank, the seller's invoice and the concessionaire who performed the sale as well as a description of the

fault are submitted for the inspection of the allegedly faulty storage tank in the technical laboratory

(absolutely necessary as a trained professional will inspect the storage tank and analyse the cause of the

fault). To avoid any confusion regarding the storage tank during transportation, it must be provided with

a clearly legible label (preferably with the address and signature of the end user). A corresponding

photographic record is required showing the extent of the damage, the installation details (cold water

input, hot water output, heater flow and/or back-flow, safety fittings, and, if applicable, expansion vessel)

as well as the faulty area of the storage tank. In addition the PM expressly reserves the right to demand

the provision of any documentation, the device or device components by the customer deemed

necessary to clarify the situation. A prerequisite for the performance of services under the heading,

Product Liability, is that it is incumbent upon the damaged party to prove that the damage was caused

by a product of the PM. Claims made in line with the Austrian Product Liability Act are only valid for the

sums above the first EUR 500 (excess). Until such time as the entire situation and circumstances have

been clarified as well as until such time as the cause that resulted in the damages has been clearly

identified, the PM decidedly rejects any potential culpability. Failure to observe the operating and

installation instructions as well as the relevant standards is considered negligence and leads to a

disclaimer of liability in the area of compensation.

Subject to technical alterations, errors and misprints excepted.

Please forward this on to the user.

10/2016