Austro Flamm TORSO Manuale - Pagina 8
Sfoglia online o scarica il pdf Manuale per Stufa a legna Austro Flamm TORSO. Austro Flamm TORSO 16.
Torso
Heating in-between seasons
Heating the stove in between seasons, when the
outside temperatures are higher, the flue gases may
not be able to escape completely and this may lead to
disturbances in the chimney draught, especially if the
temperatures are rising suddenly. The stove has to
be charged with less wood and the primary air has to
be increased so that the wood can burn down faster
(with visible flames) and thus the chimney flue can
stabilize.
4. THE MOST IMPORTANT SPARES—OVERVIEW
Gaskets
Description
Hollow round gasket 6 mm ( 2 m)
Round gasket 12 mm (2,2 m)
Flat gasket 8 x 2 mm (0,6 m)
Keramott
Description
Torso bottom left, keramott
Torso bottom right, keramott
Grate
Torso wood retainer, keramott
Torso side component left, kermott
Torso rear, keramott
Torso baffle plate rear, keramott
Torso baffle plate front, keramott
Torso side component right, keramott
Other parts
Description
Torso door glass
Glass cleaner ½ litre
Igniter
Stove laquer
Accessories
You can obtain floor plates made of glass or steel, hearth accessories or care products or the Heat
Memory System for heat storage from your certified dealer.
IMPORTANT:
Have defective parts replaced by your certified dealer only. This will guarantee that your
stove functions properly and safely.
The fireplae must not be amended.
Maintenance
To clean the glass, please use a specialized product such as Thermohit glass cleaner. Lacquered
surfaces are to be cleaned only with a cloth (may be damp). Special cleaning agents should also be used
for stainless steel surfaces.
Cleaning
The stove, flue outlets and smoke pipes should be cleaned and inspected for deposits every year – if
necessary more often, e.g. after the cleaning of the chimney. The chimney also has to be cleaned regularly by
the chimneysweeper. Your chimneysweeper will inform you of the necessary inspection intervals. An expert
should inspect the stove annually.
6
Chimney fire
A chimney fire may occur, due to sooting and
deposits in the chimney, if wrong or humid fuel is
used. Close all air inlets on the fireplace/chimney
immediately and call the fire brigade. Please have an
expert inspect your chimney for cracks and air-
tightness after the burning out of the chimney
Nr. drawing
Part number
20
718183
21
710338
23/24
710096
Nr. drawing
Part number
1
716354
2
716355
3
716408
4
712642
5
716645
6
716356
7
716358
8
716357
9
716646
Nr. drawing
Part number
22
716376
--
640070
--
640162
--
650002
Keramott numbering = installation instructions!
english
.