Austro Flamm 55x Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Camino da interno Austro Flamm 55x. Austro Flamm 55x 10. Inserts
Anche per Austro Flamm 55x: Manuale di istruzioni (17 pagine)

Stampa la pagina

3. operating elements

The insert series of 45x, 55x, 65x, 75x, 55x55x stands out because of the extremely simple operation.

convection air in-/outlet

possible deflection damper

(for deflecting flue gases into heat exchanger)

or throttle valve

door lock

operating lever for combustion air flap

combustion/convection air inlet

4. operating symbols/operation

operation lever for combustion air flap

+ = maximum air supply for fast burning

I = average heat output

– = small heat output

hinged door mechanism

press handle outwards

pull open

door can be swung open

– „release":

Release the door handle in an open position (angle > 20°), door closes and locks

automatically.

sliding door mechanism

–

lift = door open

–

pull down = door closed

deflection damper for heat exchanger

– turn to the right: flue gases will be conducted into the heat exchanger.

This may be executed only if the insert door is closed.

– turn to the left: flue gases will be conducted directly into the chimney. The insert door may be opened only in

this position.

throttle valve

– turn to the left: flap closes.

– turn to the right: flap opens. Flue gases exit through the chimney. The insert door

may be opened now.

5. fuel

allowed fuel

dry, well-seasoned and natural wood (preferably hard wood) or wood briquettes.

Clean combustion

The fuel wood must be dry (wood moisture < 15 %) and untreated. Moreover it is very important to use the

correct quantity of wood, in order to reach a clean and low-emission combustion. Apart from a low caloric value,

moist wood also makes your insert's glass panes soot faster than necessary. A sooting after 2-3 times of use is

normal. If you use fuel for heating which is not allowed, all guarantee or warranty claims ends

immediately!