Austro Flamm 65x Manuale d'uso - Pagina 5
Sfoglia online o scarica il pdf Manuale d'uso per Camino da interno Austro Flamm 65x. Austro Flamm 65x 10. Inserts
Anche per Austro Flamm 65x: Manuale di istruzioni (17 pagine)
Stampa la pagina
6. special advice
•
Please mind that all surfaces of the insert heat up extremely during operation. Please
use the heat-proof glove, which comes with the insert. Please also make your children
aware of this danger and keep them away from the fireplace during operation.
•
In order to avoid a heat buildup, please DO NOT cover or close any air grids/in-
/outlets.
•
Every insert is made for and therefore has its own maximum fuel quantity. Bigger
quantities than the ones listed below may lead to overheating and damages of the
fireplace!
Maximum fuel quantity:
45K / 45S
55K / 55S
65K / 65S
75K / 75S
55x55x
If the insert has been installed with a ceramic heat exchanger, we recommend the
following maximum fuel quantities:
45K / 45S
55K / 55S
65K / 65S
75K / 75S
55x55x
The second fuel reload should be made after approx. 45 min after the first. Further fuel
reloads can be made, but please prolong the intervals and reduce the fuel quantity (by
0,5 – 1 kg).
•
If the manufacturer's dimensional instructions for combustion air cross sections and
flue dimensions cannot be kept or are changed afterwards, all warranty and guarantee
claims end.
•
No flammable elements may be placed in the insert's
radiation area closer than 80 cm measured from the bottom
edge of the comustion chamber. Next to the fireplace casing
a maximum distance of 5 cm must be kept for objects made
of flammable materials.
•
construction type A1: Inserts are tested and certified
according to this type and are equipped with a self-closing door, which means that an
operation with open door is no longer possible. This also means that special closing
mechanisms have been installed on the insert, to avoid the door staying open during
operation. It is not allowed to carry out modifications on the insert, which may
afterwards allow the operation of the insert with an open door. For putting in more
wood or cleaning the door glass, the door must be held open against the clamping
force of the door spring or the sliding mechanism and it must not be blocked with any
jamming gadget.
•
Only original spare parts or spare parts which have explicitly been approved or offered
by the manufacturer may be used. Please ask your stove fitter or a specialised
Austroflamm dealer.
•
The insert/fireplace must not be modified!
7. air supply in the installation room
The fireplace can only operate correctly if there is a sufficient air supply in the installation room. Take
care of a sufficient air supply before your start firing up your fireplace. Open the combustion air flap on
the fireplace and keep it open during the whole time of operation. Equipment concerning the combustion
air supply must not be altered.
= 2,5 kg/h
= 3,0 kg/h
= 3,5 kg/h
= 4,0 kg/h
= 2,4 kg/h
2 x 2,5 kg
2 x 3,0 kg
2 x 3,5 kg
2 x 4,0 kg
2 x 2,5 kg
5
80cm
80cm