4x4 TOUGH 709506 Manuale di istruzioni - Pagina 6

Sfoglia online o scarica il pdf Manuale di istruzioni per Automobile Accessories 4x4 TOUGH 709506. 4x4 TOUGH 709506 12. 4wd snatch block

INSTRUCTIONS FOR USE

"TFAS"; Think First Act Second. This is the golden rule with all recovery

options. Take the time to access the situation before commencing the recovery.

• To begin with nd a suitable anchor point. If the anchor point is a tree; place a

tree trunk protector around the tree. Leave the snatch block open, with a rated

shackle ready to lock it.

• Run out enough winch line to get from the vehicle to the anchor point and back

to the vehicle.

• Place the winch line into the snatch block and then close the block.

• Ensure the winch line is tangle free and has no cross overs in the layout of the

line, as this may inadvertently happen with both winch lines running side by side.

• With the snatch block closed, attach the block to the tree trunk protector using a

rated bow shackle. (sold separately).

• Ensure that the bow of the shackle is against the strap and the pin is against the

snatch block's eye. This is to stop the strap binding in against the pin. Tighten the

pin in the shackle and then back the pin o by a half a turn – if the pin is not

backed o by a half turn, the pin can bind up under load and become impossible to

loosen.

• Run the winch hook back to the vehicle and attach it to a rated recovery point on

the vehicle. Attach a damper blanket to BOTH winch lines. One damper should be

towards the snatch block, while the other should be towards the winch hook on the

vehicle. Check and stop during winching to adjust the dampers as needed.

• Move everyone away from the winching area and begin to take up the slack

while watching for any twisting or crosses in the line. When everyone is clear and

the slack is taken up, begin to winch, remembering to stop and adjust the winch

damper as it moves away from the snatch block.