Bresser BR-SP60 Manuale di istruzioni - Pagina 3

Sfoglia online o scarica il pdf Manuale di istruzioni per Apparecchiature di illuminazione Bresser BR-SP60. Bresser BR-SP60 13. Led fresnel light

Stampa la pagina

DELIVERY CONTENT

LED Fresnel Light (A), remote control (B),

power adapter (C), power cable (D)

PARTS OVERVIEW

LED Display

Power switch

Spot Setting

Adust the beam angle range of 20 - 80 degrees by turning the knob

Dimmer knob

The knob provides dimmer control and remote channel selection.

Turn to adjust the brightness (10-99) or to select a channel (01-99)

Short press to get from brightness control to remote channel

select. Before use of remote, the controller must be paired with

the same channel.

Power socket

Locking screw (tilt joint)

Fixing screw (tripod connection)

Tripod connection

Tilt joint

Battery holder

Barn doors

Two-pin C7 socket

Barrel connector

Euro plug

Two-pin C7 plug

(B) Remote controller:

power button

- button

+ button

menu button

ESTABLISHING THE POWER SUPPLY

1. Insert the barrel connector (13) of the power adapter (C) into the

power connection socket (5) on the LED light.

2. Insert the two-pin C7 plug (15) of the power cable (D) into the

two-pin C7 socket (12) of the power adapter (C).

3. Insert the Euro plug (14) of the power cable (D) into a wall socket.

INSTALLING THE V-MOUNT BATTERY

(optional)

1. Slide the fully charged battery* (type NP-F970) into the holder (10)

from the side so that the battery clicks into place.

2. To remove, slide the battery out of the holder in the opposite

direction.

TURNING ON THE LED LIGHT

1. Establish the power supply for the device (insert battery or

connect power cable).

2. Press the power switch (2) to switch the device on or off . The

lighting is switched on with the settings of the last use.

Important: Disconnect the device from the power supply if it is not

going to be used for a long period of time!

BRIGHTNESS ADJUSTMENT

1. Turn the dimmer knob (4) clockwise to increase the brightness.

2. Turn the dimmer knob (4) counterclockwise to decrease the

brightness.

*not included