BENDIX ATR-1 ANTILOCK TRACTION RELAY Manuale
Sfoglia online o scarica il pdf Manuale per Unità di controllo BENDIX ATR-1 ANTILOCK TRACTION RELAY. BENDIX ATR-1 ANTILOCK TRACTION RELAY 12. Relay valves from de-icing chemicals
Anche per BENDIX ATR-1 ANTILOCK TRACTION RELAY: Bollettino tecnico (2 pagine)
Stampa la pagina
®
Bendix
ATR-1
®
™
MOUNTING
BRACKET
BODY
SUPPLY
PORT
COVER PLATE FOR
REMOTE MOUNT
FIGURE 1 - ATR-1
ANTILOCK TRACTION RELAY VALVE
™
DESCRIPTION
The ATR-1
antilock traction relay is a specialized air brake
™
valve developed for use on Bendix antilock/traction equipped
vehicles.
It is essentially three separate valves working in combination
in a single housing. An R-14
valve and is fitted with a modified cover containing a double
check valve and a traction control solenoid. The ATR-1
contains both air and electric components to provide the
service braking and traction control (differential braking)
functions. A Bendix antilock traction controller can be
mounted to the ATR-1
™
valve or a cover plate can be installed
and the antilock controller mounted elsewhere on the vehicle.
When an ATR-1
valve is combined with an antilock traction
™
controller the resulting assembly is referred to as an antilock
traction assembly.
The ATR-1
valve replaces the standard relay valve used to
™
control the rear axle service brakes and performs the standard
relay function. Like the standard relay valve it replaces, the
ATR-1
valve (sometimes with attached antilock controller)
™
AntiLock Traction Relay Valve
CONTROLLER
MOUNTING HOLES (4)
SERVICE
REMOTE MOUNT ATR-1
style service relay is the base
™
TRACTION CONTROL
SOLENOID
UNDRILLED
"CON" PORT
PORT
RELAY VALVE
™
is normally mounted near the service brakes it serves. A
mounting bracket, furnished with the valve, permits either
frame or cross member mounting. All air connections on
the ATR-1
™
valve are identified for ease of installation. The
letter identification and air line connections are shown below
for reference.
ATR-1
VALVE AIR CONNECTION
™
valve
™
Supply (to reservoir)
Delivery (to brake Chamber)
Service (to brake valve rear delivery)
Control (not drilled or threaded on ATR-1
The ATR-1
™
which includes the R-12
The internal components of the relay portion of all of these
valves are interchangeable with the R-12
the same basic components are used to service all of them.
The ATR-1
™
to accommodate specific applications, however the standard
is 4 psi.
DELIVERY
PORT (4)
2 PIN SOLENOID
CONNECTOR
valve is part of the R-12
™
™
, R-14
™
, BP-R1
valve is available with various crack pressures
SUPPLY
PORT
EMBOSSED
IDENT.
SUP
DEL
SER
™
valve) CON
family of relay valves
™
, AR-1
™
.
valve and therefore
™
1