dymax ECE ZIP Shutter Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature di illuminazione dymax ECE ZIP Shutter. dymax ECE ZIP Shutter 20. For use with dymax ece flood lamp systems

Stampa la pagina
Dymax ECE ZIP™ Shutter User Guide
6

System Components

Figure 1. ECE ZIP Shutter Component Diagram
Digital Potentiometer (Timer) (1)
potentiometer (timer) on the control panel. The shutter's "open time" can be set from 1 to 99
seconds.
Actuate Button (2)
unit can also be actuated by foot switch. The foot switch can be connected to the foot switch
connection (5) on top of the rear panel.
Mode Selector Rocker Switch (3)
The mode selector rocker switch is used to select the mode of operation.
Mounting Plates/Adapter Plates
housings. The first has a clear aperture of 5" x 5" and should be used with the ECE 5000. The second
has a clear aperture of 8" x 8" for use with an ECE 2000. The ZIP Shutter has a clear aperture,
therefore there is no distraction of the light flow when the shutter is open.
Reflector Cable Connection (4)
lamp's power supply, which is connected through this receptacle on top of the shutter's rear panel.
Belt Tension Adjustment Screw (6)
- The operator sets the shutter's "open time" using the digital
- Depressing the actuate button activates the gear motor inside the shutter. The
- There are two operation modes available: manual and timed.
- The ZIP Shutter includes two mounting plates for various reflector
- The power (24V) to the ZIP Shutter comes directly from the flood
- Used to tighten the curtain drive belt.