dymax BlueWave AX-550 Istruzioni per l'avvio rapido
Sfoglia online o scarica il pdf Istruzioni per l'avvio rapido per Apparecchiature mediche dymax BlueWave AX-550. dymax BlueWave AX-550 2. Flood lamp mounting stand kit
Anche per dymax BlueWave AX-550: Manuale d'uso (16 pagine)
Stampa la paginaQuick Start Instructions
BlueWave
®
AX-550 Flood Lamp Mounting Stand Kit (43410)
Unpacking and Setup Instructions
1. Remove the stand and carriage from the packaging.
2. Remove the cap and 2 fasteners from the stand's upright. These are push-in fasteners, not screws, and can
easily be removed by pushing upward on the plate (Figure 1).
Fasteners (2X)
Cap
Stand's Upright
Figure 2. Attach the Carriage
Figure 1. Remove Cap and Fasteners
3. Using a 4-mm hex key, attach the carriage to the emitter using the screws supplied with the carriage. (Figure 2)
4. Slide the carriage onto the stand upright, being sure to align bearing pads and t-nut into slot (Figure 3).
Figure 3. Slide Carriage into Stand