Active Living BP-1307 Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Monitor della pressione sanguigna Active Living BP-1307. Active Living BP-1307 8. Upper arm blood pressure monitor

Stampa la pagina

Unit Operation

3. Time Format setting

Press " SET "button again to set the time format setting mode. Set the time format by

adjusting the"M" button. EU means European Time US means U.S Time.

4. Saved Settings

While in any setting mode, press " START/STOP " button to turn the unit off. All

information will be saved.

Note: If unit is left on and not in use for 3 minutes, it will automatically save all information

and shut off.

Unit Operation

Testing

1. Power On

Press and hold

" START/STOP "

button until a beep sounds.

for one second as unit performs a quick diagnosis. A long tone indicates device is ready

for testing.

mmHg kPa

AVG

( )

(

)

Note: Unit will not function if residual air from previous testing is present in cuff.

The LCD will flash "

" until pressure is stabilised.

The LCD screen will appear

Unit Operation

Applying the Arm Cuff

1. Firmly insert air plug into opening located on left side of monitor unit.

2. With sticky nylon section facing outward, insert end of cuff underneath metal ring

of cuff

3. Fasten cuff about

1-2cm (0.4-0.8'')

bare arm and keep level with heart while testing

Note: Do not insert air plug into opening located on right side of monitor unit.

This opening is designed for an optional power supply only.

Unit Operation

2. Pressurisation

Initial pressure is first pumped to 190mmHg. If the current user's systolic blood pressure

is over 190mmHg, the unit will automatically re-inflate to the proper shelf.

Note: Pressurisation will gradually subside and ultimately stop when cuff is not

properly applied to the arm. If this occurs, press" START/STOP "button

to turn the unit off.

above the elbow joint. For best results apply cuff to

mmHg