BeneCheck BK3-12M-D Manuale d'uso - Pagina 14

Sfoglia online o scarica il pdf Manuale d'uso per Strumenti di misura BeneCheck BK3-12M-D. BeneCheck BK3-12M-D 16. Multi-monitoring meter

Stampa la pagina

Chapter 8

Error Message and Trouble Shooting

Message

Cause

• Problem with code strip.

• Insert the strip in an

　improper way.

• Problem with test strip.

• The power of the battery

　is too low to run a test.

• Problem with code strip.

• Insert the code strip in

　an improper way.

• The temperature was

　below or above the

　meter operating range.

• An used test strip or a

　damp strip.

Solution

Repeat the coding procedure and ensure the code

number is the same in label, code strip and

screen. Insert the strip again. If the problem

persists, please contact the distributor for service.

Replace a new battery immediately.

Repeat the coding procedure and ensure the code

number is the same in label, code strip and

screen.

If the problem persists, please contact

the distributor for service.

Repeat the test after the meter has reached to the

temperature within the operating range. If the

problem persists, please contact the distributor

for service.

Review the instructions and try again with a new

test strip.

If the problem persists, please contact the

distributor for service.

• Uncompleted test caused by

Review the instructions and try again with a

　removing the test strip during

new test strip. Please don't remove the strip

　the measurement.

before the test is completed.

• Problem with strip.

Review the instructions and try again with

the same test strip.

If the problem persists, please contact the

distributor for service.

• Use an improper code

Repeat the coding procedure and ensure the

code number is the same in label, code strip

　strip.

and screen.

contact the distributor for service.

• Do not get enough

Take a new strip and make sure you have

　sample volume for the

enough sample volume for your test. Repeat

the test again. If the problem persists,

　test.

please contact the distributor for service.

• Test result is higher than

1.Review the instructions and try again with

　the range listed on Chapter 9.

a new test strip.

2.If the problem persists, please call local

authorized distributor for help.

• Test result is lower than

1.Review the instructions and try again with

　the range listed on Chapter 9.

a new test strip.

2.If the problem persists, please call local

authorized distributor for help.

If the problem persists, please