Dymo LetraTag Plus LT-100T Manuale di riferimento rapido - Pagina 2

Sfoglia online o scarica il pdf Manuale di riferimento rapido per Etichettatrice Dymo LetraTag Plus LT-100T. Dymo LetraTag Plus LT-100T 2. Dymo letratag label maker - quick reference guide
Anche per Dymo LetraTag Plus LT-100T: Manuale di riferimento rapido (2 pagine)

Stampa la pagina
Dymo LetraTag Plus LT-100T Manuale di riferimento rapido
Adding the Date
1.
Press
.
2.
Select
Date and press
.
Adding Box and Underline Styles
You can highlight your text by choosing a box or underline style.
Underline
Square
Pointed
Rounded
Crocodile
1.
Press
.
2.
Select
Borders, and press
.
3.
Select underline or a box style and press
Adding International Characters
The label maker supports the extended Latin character set using RACE
technology. Similar to using a mobile phone keypad, when you hold
down a letter key for longer than one second, you will scroll through
variations on that letter. To insert the character, release the key when the
desired character appears.
Caring for Your Label Maker
Clean your label maker from time to time to keep it working properly.
Clean the cutter blade each time you replace the label cassette.
! The cutter blade is extremely sharp. Use caution when cleaning.
Cleaning the Cutter Blade
1.
Dampen a cotton ball with alcohol.
2.
Remove the label cassette.
3.
Place the tip of a ball-point pen or
pencil on the black post as shown in
Figure 4, and press the post down.
4.
While holding down the post, press
and hold the cutter lever to expose the
cutter blade.
5.
Release the post and clean both sides of the blade with the cotton ball.
6.
Release the cutter lever.
Cleaning the Print Head
1.
Remove the label cassette.
2.
Remove the cleaning tool from inside the label compartment cover.
3.
Gently wipe the padded side of the tool across the print head.
Adding Symbols
The label maker supports the symbols shown below.
Position in Row
Edged
Train
Sweet Hearts
Flowers
.

Troubleshooting

Problem/Error Message
No display
Poor Print Quality
Press in
and hold
Poor Cutter Performance
Printing
Print
Too many characters
head
Figure
4
Exceeded maximum number of
characters in buffer.
Battery low
Batteries almost discharged.
Tape Jam
Motor is stalled due to label jam.
If you still need assistance, contact DYMO Customer Support at
(203) 588-2500. You can also visit the DYMO Web site at
www.dymo.com.
Position in Row
Solution
•
Ensure the label maker is turned on.
•
Replace discharged batteries.
•
Replace batteries or attach power adapter.
•
Ensure label cassette is installed properly.
•
Clean the print head.
•
Replace the label cassette.
Clean the cutter blade. See Caring for Your
Label Maker.
No action required.
Message disappears when printing is finished.
Delete some or all of the buffer text.
Replace batteries or connect AC power adapter.
•
Remove jammed label; replace label cassette.
•
Clean cutter blade.
Adding Symbols (continued)
, select Symbols, and press
1.
Press
shown in the table appears in the display.
2.
Use the arrow keys to move to the desired symbol. The left and right
arrows move horizontally along a row of symbols. The up and down
arrow keys scroll vertically through the rows of symbols.
3.
When you locate the symbol, press
to add the symbol to your label.
Previewing Your Label
1.
Press
.
2.
Select
Preview and press
.
Clearing the Display
♦
Press
to clear all label text and formatting from the display.
Clear
Storing Label Text
You can store up to nine specific labels you use frequently.
1.
Press
.
2.
Select a memory location and press
.
Recalling Stored Labels
1.
Press
.
2.
Select a label to recall and press
.
To clear a memory field, first recall a label and then press
This product is CE marked in accordance with the EMC directive and the low voltage directive and is
designed to conform with the following international standards:
US FCC Class B Compatibility
Safety - EN 60950, IEC 950, UL 1950
EMC Compatibility EN 61000 3-2/3; EN 61000 4-2/3/4/5/6/8/11; ENV 50204;
EU Immunity - EN 55024 & addendum A1, A2 Electromagnetic Compatibility (EMC) -
Information Technology equipment, Immunity Characteristics
Emissions – EN 61000-6-3: Electromagnetic Compatibility (EMC) - Part 6: Generic Standards
- Section 3: Emission standard for residential, commercial and light industrial environments.
RoHS 2002/95/EC
Distributed by:
DYMO, Stamford, CT
800-426-7827: www.dymo.com
©2008 Sanford, L.P.
. The first row of symbols
.
Clear
W001841 Rev. 2/09