Dymo LabelWriter 450 Turbo Manuale di installazione

Sfoglia online o scarica il pdf Manuale di installazione per Software Dymo LabelWriter 450 Turbo. Dymo LabelWriter 450 Turbo 4. How to order and insert a roll of labels in the dymo labelwriter
Anche per Dymo LabelWriter 450 Turbo: Manuale di avvio rapido (20 pagine), Manuale di avvio rapido (14 pagine), Panoramica (2 pagine), Manuale di configurazione (11 pagine), Manuale di avvio rapido (10 pagine), Manuale d'uso (19 pagine), Manuale operativo (3 pagine)

Customer Guide

DYMO LabelWriter 450 Turbo Printer Installation

PASS

This is the process for installing a DYMO LabelWriter 450 Turbo printer on a PASS workstation

running PASS Ware or PACMED Server Plus. The process is the same for both applications.

Refer to the DYMO Quick Start Guide that came with your printer for instructions on loading

labels.

Open the DYMO printer box and remove the printer, USB cable, power cord, power adapter, CD,

and Quick Start Guide.

A USB cable

B DYMO printer

C Power cord

Connect the power and USB cables to the DYMO printer:

2.1

Connect the power cord to the power adapter.

2.2

Connect the power adapter cord to the power connection on the bottom of the printer,

then plug the power cord into an AC outlet.

2.3

Connect the square end of the USB cable into the USB port on the bottom of the printer.

120-0493 Rev 01

D Power adapter

E Quick Start Guide

F CD

page 1 of 4

Parata Technical Assistance Center

1-888-PARATA1 (727-2821)