HHD S30 Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Accessories HHD S30. HHD S30 5.

Temperature setting function button

Press "

" button once, the set indicator will light up. Press "

" or "

" button to adjust the

temperature and press "

" button again to confirm the set temperature. Adjustable temperature

range is 20-39.5℃. (Press "

" button and hold for 3 seconds to test egg turning function)

Indicator status description:

The red light on left side of the display screen is used as heating indicator. When it is on that means

the machine is heating.

Operation Tips:

1. Plug into AC220V/AC110V, the left light on and incubator enters into working mode (heater also

start working);

2. Ensure adding full water into water tank before use;

3. Before incubating, preheat the machine for 15 - 30 minutes, and check whether the setting

temperature is 38°C. If not, please set the temperature to 38°C. Please refer to the button

description to set;

4. Check whether the two LED indicators are on during warm-up;

5. Put fertilized eggs into the machine, close the cover, then plug in.

