5Gstore EZ-62B Manuale di configurazione - Pagina 3

Sfoglia online o scarica il pdf Manuale di configurazione per Interruttore 5Gstore EZ-62B. 5Gstore EZ-62B 15. Single outlet remote power switch

3. Via the mobile app - select Add Device at the top right; Via Cloud4UIS.com -

select the 3 vertical dots button at the top, then the +Outlet button

a. If you are connected to the same LAN as the EZ-62B, the

cloud will automatically detect it by its local IP address and

display its serial number. Click the + button to the right of this

to continue

b. If you are on location, but connected to a different LAN than

the EZ-62B, click the + button next to Add by Serial Number

to continue. The next screen will prompt you to unplug the

Ethernet LAN cable from EZ-62B for 1 second and plug it back in .

This will enable Add Mode (LEDs will flash one after another)

4. The next screen will prompt you to

enter the Device's ID (found on the

bottom of your EZ-62B). Click Next

5. You should now see Completion ,

which indicates your device has been

added.

6. Click Done and you will be taken back

to the Device List page.

7. You may now click on your EZ-62B from here to configure settings

Configuring your EZ-62B:

This can be done 3 different ways:

Section 1 : ezDevice mobile application

Section 2 : Cloud4UIS website (i.e. Cloud Account)

Section 3 : Local web administration page (must be connected through a computer on

the same router as the EZ-62B)

NOTES:

● Saving a copy OR restoring a copy of your configuration settings can only be

done via the Local Web Administration page

● Each EZ-62B can only be added to an account once . If you need to change that,

you will need to remove the device from your account first and then another user

will be able to add - OR - use the Share feature to allow other users to manage

the device

● The 1st user who adds the EZ-62B to their account becomes the device 'owner'