Adel BCR Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Lettore di codici a barre Adel BCR. Adel BCR 14. Barcode/contactless reader

Stampa la pagina
ADEL S.r.l. – BCR Barcode / Contactless reader - User Manual Rev. 1.3

5.1.4 I/O SIGNAL CONNECTOR

Besides the I/O signals present on the I/O 1 connector, on the I/O 2 connector an input digital signal and a
power output signal are available and ideal to drive a ralay.
The I/O 2 (JST PH 4x1 PM 90°) connector pinout is the following:
Pin 1
OUT 3B
Pin 2
GNDPP
Pin 3
IN 3B
Pin 4
GND

5.1.5 OPTO #3 CONNECTOR

On the OPTO #3 connector the connection for a optional external optical sensor is available.
The OPTO #3 (JST PH 4x1 PM 90°) connector pinout is the following:
Pin 1
VCC
Pin 2
OSC
Pin 3
VCC
Pin 4
OPTO

5.1.6 STEPPING MOTOR CONNECTOR

The connection of the stepping motor occurs by the means of the connector MOTOR (AMP MODII 4 PM
90°) with the following pinout
Pin 1
OUT 1
Pin 2
OUT 2
Pin 3
OUT 3
Pin 4
OUT 4

5.1.7 SCANNER CONNECTOR

The laser scanner is connected to the CPU board by the means of the connector BCR (JST PH 4x1 PM 90°)
with the following pinout:
Pin 1
VCC
Pin 2
GND
Pin 3
LASER_TRIGGER
Pin 4
TX

5.1.8 CONTACLESS MODULE CONNECTOR

The contactless module is connected to the CPU board by the means of the connector C_LESS (JST PHD
2x5 PM 90°) with the following pinout:
Pin 1
VCC
Pin 3
Rx1_RS232
Pin 5
Tx1_RS232
Pin 7
C_GND
Pin 9
I/O AUX0B
Following drawing and form show the pinout of the connector that must be inserted in the contactless
module.
Pin 2
Rx1
Pin 4
Tx1
Pin 6
I/O AUX1B
Pin 8
C_GND
Pin 10 I/O AUX2B
pag. 7