Gage Bilt GB713 Manuale di istruzioni originale - Pagina 3
Sfoglia online o scarica il pdf Manuale di istruzioni originale per Utensile elettrico Gage Bilt GB713. Gage Bilt GB713 18.
Anche per Gage Bilt GB713: Manuale di installazione (14 pagine), Manuale di istruzioni originale (20 pagine)
Stampa la pagina
WARNING:
Any other use is forbidden.
The GB713 is a pneumatic-hydraulic tool designed specifically for the efficient installation of a wide range of blind rivets. It weighs
6.50 lbs. (2.9 kg) and can be operated in any position with one hand. It has a .760" (19.3 mm) rivet setting stroke and a rated pull load
of 4,500 lbs. (20.0 kN) with 90 psi (6.2 bar) air pressure at the air inlet.
The GB713 riveter operates on 90 to 100 psi (6.2-6.9 bar) of air pressure, providing the maximum efficiency. At 90 psi (6.2 bar) air
pressure, the GB713 does not exceed 81.5 dB (A) and consumes 3 cfm at 20 cycles a minute.
The air inlet is provided with 1/4-18 female pipe threads to accept the users air hose fitting.
WARNING:
Do not operate in an explosive atmosphere.
The GB713 can be operated between 0ºF — 118ºF
GB713
DESCRIPTION
ENVIRONMENTAL USE
SPECIFICATIONS
Hand Held Weight
- 6.50 lbs. (2.9 kg)
Air pressure req'd
- 90-100 p.s.i. (6.2-6.9 bar)
Air consumption
- .29 SCF/cycle (8.21 L/cycle)
Hydraulic oil
- Automatic Transmission Oil
Setting stroke
- .760" (19.3 mm)
Rated pull load
- 4,500 lbs. (20.0 kN)
Noise level
- 81.5 dB (A)
Vibration
- Tested– No hazards found.
Dexron III, or equivalent.
3
7/11 REV 6/16